![]() ![]() |
Sep 12 2004, 11:53 AM
Post
#1
|
|
|
Prime Runner ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3,577 Joined: 26-February 02 From: Gwynedd Valley PA Member No.: 1,221 |
Most of the target aids are to help people fire more bullets without losing accuracy but from personal experience I was wondering if they could be harming individual shooting.
This might get into a "Raygun" question. but from actual target shooting, I've noticed a difference. I have a Beretta(automatic) and a Webley (revolver). The beretta has a lot of padding and a wide grip. When I shoot it I can barely feel the recoil. The Webely is much thinner and I can really feel it kick with each shot, BUT I do better with the Webely when I go through a box of ammo on a range. So this makes me wonder if the pads which make the beretta more comfortable, to shoot, might interfere with accuracy. Both guns are about the same caliber .38 and .380 and the revolver has a slightly longer barrel but this shouldn't make that much oif a difference over time. |
|
|
|
Sep 12 2004, 12:28 PM
Post
#2
|
|
|
Running Target ![]() ![]() ![]() Group: Members Posts: 1,070 Joined: 7-February 04 From: NYC Member No.: 6,058 |
Without being able to see the "padding" on the Beretta (I've never seen a handgun with a grip I'd call padded, certainly not to the degree that it was soft and harder to grip firmly) I'd be much more inclined to just put this down to being all in your head. (no offense meant) You're more confident in one of the guns, so you shoot better with it.
And whether you feel more recoil and more of a jerk would have a lot more to do with how much each gun weighs, and the fact that revolvers always jerk more than automatic handguns, because the barrel is located much higher above the grip than in an automatic and when the gun recoils it has more leverage, displacing your wrist more. |
|
|
|
Sep 12 2004, 05:29 PM
Post
#3
|
|
|
Mostly Harmless ![]() ![]() Group: Dumpshocked Posts: 937 Joined: 26-February 02 From: 44.662,-63.469 Member No.: 176 |
What do you mean by "padding"?
It could be that you're just not getting a good grip on the Beretta. If you have small hands, I'd suggest taking any padding off of the grip and trying it that way. Also, are you using both hands to shoot? Try to get as much surface contact with the gun as possible, and as high of a hold as possible. Get the web of your hand as high up into the beavertail as you can. Wrap your fingers around the frontstrap, then lay your thumb along the grip, under the safety. Then take your off hand and press your index finger up against the bottom of the trigger guard. Wrap your fingers around your trigger hand. Place your trigger hand thumb on top of your off hand thumb and point both along the axis of the barrel, toward the target. Grip firmly. Firmly press your trigger hand into your off hand. Push your arms out as far in front of you as you can, with the gun directly in front of your face. Stand with your shoulders square to the target, feet shoulder width apart, knees slightly bent. Look directly at the target, then bring the gun's sights between your eyes and the target. Try to shoot with both eyes open. It will help with depth perception. See if that helps you out any. It could also have a lot to do with the trigger. Before the "Age of Litigation" began, triggers on firearms were generally easier to use (not as heavy, creepy) than they are today, so it very well could be that your Webley just has a trigger that doesn't disturb your aim as much while pulling it back before it releases. It could also depend on what trigger mode you're using while shooting. Both the Webley and your Beretta (I'm guessing it's a model 84 if it's a .380), have double-action triggers. If you're not now, try using both from the single action mode (cock the hammer first). What kind of ammunition are you using for each? Anyway, there are a lot of factors that can go into this, so I'd need more information before I could give you a good idea of what the problem might be. Do you notice anything particularly strange happening when you shoot the Beretta? |
|
|
|
Sep 12 2004, 09:28 PM
Post
#4
|
|
|
Neophyte Runner ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,073 Joined: 23-August 04 Member No.: 6,587 |
On a more game related note there is no modification that I sor as applying padding to the grip of a gun. Customised grip is just moulded plastic (and now I think about it probably a legal liability) shock pads can not be applied to anything you don’t jam against your shoulder and it is probably about an inch of stiff foam.
I was at a venture (scout jamboree style event for ages 14-18) in Adelaide south Australia and there was a shooting event. One smart cookie decided that if when using a shotgun jammed against your shoulder the recoil would hurt a bit it would be slower if it started 10cm in front so he could slow it down a bit as it travelled back. Predictably he went home with a broken collarbone. Edward |
|
|
|
Sep 12 2004, 09:47 PM
Post
#5
|
|
|
Prime Runner ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3,577 Joined: 26-February 02 From: Gwynedd Valley PA Member No.: 1,221 |
Because the beretta's an automatic the mag goes inside the grip, masking it wider. At first it felt odd after the thin grip of the webely but now that I'm use to it, it feels more comfortable and the webely more "boney."
The wider grip means that I really don't feel a recoil with it. I'm very careful to aim after each shot, rather than just burn through the mag. I use a teacup grip but the beretta(yep 84 cheetah) has marks for other fingers to hold it on the trigger guard and I try to use those. The beretta uses standard .380 pisdtol rounds, $10 for a box of 50. the webley uses S&W .38 (not psecial) about $15/box. I shoot more with the beretta. I'm more aware of the kick in the webely and the flash of gas around the cylinder with each shot. The guys running the range, when not drooling over the webely, generally say it's in my head but I've been trying to get beyond that. They seem, when comparing them, a little scornful of the beretta by comparison to the webely which, as they point out, was made for combat. I haven't noticed any particular difference in the trigger pull, but I'll try that with the beretta, manually cocking it to make the trigger more resolnsive. I'm wondering if I brace more firmly for the webely in anticipation of the kick, meaning I'm holding it more slowly. If so, to get back to SR then the padding which assists rapid fire, could inhibit single shots. |
|
|
|
Sep 13 2004, 03:58 AM
Post
#6
|
|
|
Target ![]() Group: Members Posts: 71 Joined: 26-February 02 From: Kirkland, WA, USA Member No.: 1,816 |
Well, I gotta dump in my 20 nuyen worth.
Your accuracy problems may well stem from the fact that you just can't shoot semiautomatic pistols well. I know my dad's a good shot with his 1911, but put a revolver in his hands and he can't hit squat. Likewise, I'm a halfway good shot with a revolver, but that damn 1911, much as I love it to death, I'm nearly useless with. Sometimes, it's some microscopic detail that causes difficulties with firearms. For example, when I first started shooting, my dad tried to train me to hold a handgun the way Raygun described, the classic Weaver stance. I couldn't hit anything. So I switched to a stance that simply felt natural - which I later learned was a variant of the Weaver known as the Chapman-Weaver - and suddenly, my accuracy, comfort, and recoil control improved. For those that are interested, the Chapman-Weaver involves tilting your body away from the target slightly, to your dominant side, and holding your dominant arm straight and locked. The weak side armo is held at about a 35 degree angle off the plane of the strong side, bent halfway at the elbow and supporting the grip of the pistol, also pulling the dominant arm back into the locked shoulder. One tends to lean one's head down onto the shoulder with this stance, and I know at least I shoot one-eyed. Depth perception be damned, I can't see the freakin' sights with both eyes open. That's another stance to try. It sucks for long term shooting, if you're gonna spend 8 hours at the range, you might try something else, 'cuz this one tenses your muscles up and makes 'em sore. But it's helped me, I can actually hit the target now... Now, if I recall, neither the Cheetah or the Webley have adjustable sights... but revolvers have traditionally been more accurate than autopistols. Nowadays, that's utter rubbish, and any autopistol manufactured after about 1970 should be able to keep pace with any revolver. And yes, the Webley was made for combat, but the Beretta was made for self defense and uses much newer technology. The guys at the range are being macho twits. As a note of curiosity, where do you live? I know that if I went to my local gunshop and asked for a box of the old .38 S&W rounds, they'd look at me like I was a caveman. As for padding, there really isn't any 'padding' to speak of on the Beretta, it's just that the good folks who designed it paid more attention to ergonomics than the guy who designed the Webley. The very fact that it's a combat pistol, built to be mass produced cheaply and efficiently, precludes that sort of attention. Back to my own experience with pistols... I pick up the 1911 and it feels like an extension of my hand... but I can't hit squat with it. A good revolver, even one with less than ideal grips, is much better in my hands. Then again, I'm enough of a twitch that I can't hit anything with handguns in general, and the difference there is not so much how much better my accuracy is so much as how much closer I am to the target when I miss. I need a rifle or carbine to be able to shoot... stupid Tourette's. Anyway, yeah. I'm starting to tangent here... that's what I got to say. Hope it helps... |
|
|
|
Sep 13 2004, 07:27 AM
Post
#7
|
|||
|
Manus Celer Dei ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Dumpshocked Posts: 17,013 Joined: 30-December 02 From: Boston Member No.: 3,802 |
If you forget what is actually slowing the thing down, it's a logical conclusion. Wrong, but I can see how he arrived at it. ~J |
||
|
|
|||
Sep 13 2004, 08:14 AM
Post
#8
|
|
|
Target ![]() Group: Members Posts: 71 Joined: 26-February 02 From: Kirkland, WA, USA Member No.: 1,816 |
I've heard many a tale of such things happening... broken bones always ensue. I can't fault them for ignorance, I suppose... in theory, it's almost a good idea.
|
|
|
|
Sep 13 2004, 12:37 PM
Post
#9
|
|
|
Traumatizing players since 1992 ![]() ![]() ![]() ![]() ![]() ![]() Group: Dumpshocked Posts: 3,282 Joined: 26-February 02 From: Las Vegas, NV Member No.: 220 |
That ranks right up there with "when renting an automatic pistol at a range for the first time, don't rest your thumb vertically behind the slide when you fire it." Wacky Brit/Japanese tourists. :D
|
|
|
|
Sep 13 2004, 01:37 PM
Post
#10
|
|
|
Neophyte Runner ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,073 Joined: 23-August 04 Member No.: 6,587 |
It is a reasonable theory but when as a novice shooter you have an obvious theory and the instructor tells you to do the opposite you should consider the voice of experience and at least ask his opinion. You cant fault them for ignorance except the instructor said 4 times “hold the stock firmly against your shoulder”
Edward |
|
|
|
Sep 13 2004, 04:10 PM
Post
#11
|
|||||||||||||||
|
Mostly Harmless ![]() ![]() Group: Dumpshocked Posts: 937 Joined: 26-February 02 From: 44.662,-63.469 Member No.: 176 |
So there's no "padding" that you've added to the gun, it's just the wider grip of the 84 that you perceive might be causing you problems? You can aim and burn through a mag if you want. The two are not mutually exclusive. Especially with a .380 Auto. Just takes practice. Again, with how you're holding the gun, I would suggest not using your off-hand to support your trigger hand from underneath "teacup" style. The gun recoils up, and in that position your off hand isn't helping control that motion. You want a very firm grip around the gun, with as much contact with the gun as possible. You also want your hand as high up into the grip as you can get it. The lower the bore axis is in relation to your hand, the less the muzzle is going to flip up. Also, stay away from putting your fingers on the front of the trigger guard. That's not going to help anything. You want your off hand index finger pressed up against the bottom of the trigger guard, with your off hand's fingers all firmly wrapped around your trigger hand's fingers.
Do you know the ballistics of each round and who makes it? The standard .380 Auto is a 95 grain FMJ @ 900 fps. The .38 S&W should be a 145-146 grain LRN @ 685 fps. The reason I'm asking is because the .38 S&W is not a very common cartridge these days and if you're buying handloaded ammo, it could be making a difference in the way you shoot the gun.
So what's the Beretta for? Picking daisies? If I was stuck with @ 150-170 deliverable fpe, I think I'd rather go with the Beretta, as having 13 of those is much more comforting than just 6. It's a good, solid pistol. Probably the best .380 available today.
If you're just target shooting (as opposed to doing defensive drills), you should always fire from the single action mode as it usually requires less pressure on the trigger to release the hammer (i.e. it breaks at say, 5 pounds rather than 10 or 12), which will disturb your aim less when you pull the trigger through.
I still am not sure what you mean by padding. Do you have any padding added to the Beretta's grip, or is the grip just bigger than you're used to? You should always have a firm grip on the gun, regardless of how much it recoils. In other words, there should be no difference in how you hold a .22 compared to how you hold a .44 magnum. Consistency is the key.
Actually, what I was describing is the Modern Isosceles stance. In this stance, the shoulders are square to the target and both arms are extended evenly in front of you (making an isosceles triangle), rather that with the Weaver where the stance is bladed to the target (one shoulder forward). The difference between the Weaver and Ray Chapman's version of the Weaver is only what you're doing with your strong arm (gun hand). In the Weaver, the arm bent at the elbow. In Chapman-Weaver, the arm is straight and locked at the elbow (or very nearly so). That's it. The Modern Isosceles is generally considered to be the more consistent stance. I shoot Weaver as well, but it does appear to me that I am more consistent with the Isosceles stance.
Just takes practice. You learn to let your dominant eye take over when you're picking up the sights. The more you do it, the less you have to think about doing it. Having the other eye open not only helps depth perception, it allows you to be aware of a greater periphery to your weak side. As far as SR is concerned, I don't think padded grips should make any difference at all. |
||||||||||||||
|
|
|||||||||||||||
Sep 15 2004, 12:00 AM
Post
#12
|
|
|
Prime Runner ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3,577 Joined: 26-February 02 From: Gwynedd Valley PA Member No.: 1,221 |
I can't believe people would be dim enough to hold a rifle/shotgun stock away from their shoulder. It's like a bad practical joke. I have friends who do a lot of stuff with the History channel and you can always tell when the talking heads have po'ed someone, because they are given an overloaded musket.
"ergonomic" might be a better word than "pad." The beretta is more comfortable in my hand. I was more use to the webley but I had it first. The more I use the beretta, the better i like it's feel in my hand and the webley feels more "boney." I can understand the idea of holding the good hand with the off hand, instead of supporting it. I know you could burn through a clip, but I don't want to. I take the time between each shot. sighting the line, not rushing, being careful of the placement. Trying to adjust the aim to compensate- for example if the shot looked dead center, and came in low and right, I aim a little high and left. To bring up something, I hadn't, I close my right eye. I'm left handed and my left eye is 20/20. My right is 20/40. most time it doesn't both me but keeping both open disturbs the aim as the weak eye is nothing but a distraction. but it's consistent for both weapons and long arms so that wouldn't affect one weapon more than the other. As for the ammo, I live just north of Philadelphia. About 15 miles south of where they made the Mel Gibson film "Signs." It is a very gun friendly area. The ammo for the webely, .38 S&W (not ".38 special") is more expensive but I've had no trouble finding it, different gun shops and at least one sporting good store in the area I walk up ask for it, show my id and walk off with it. |
|
|
|
Sep 15 2004, 09:34 AM
Post
#13
|
|
|
Target ![]() Group: Members Posts: 71 Joined: 26-February 02 From: Kirkland, WA, USA Member No.: 1,816 |
Isosceles... I knew that... been a while since I really paid attention to that sorta thing. All I know is that it works for me. Sort of. Stupid shaky hands...
|
|
|
|
Sep 16 2004, 12:09 AM
Post
#14
|
|
|
Deus Absconditus ![]() ![]() ![]() ![]() ![]() ![]() Group: Dumpshocked Posts: 2,742 Joined: 1-September 03 From: Downtown Seattle, UCAS Member No.: 5,566 |
I can't believe nobody's brought up the obvious game joke as yet.
Obviously, you don't have the Pistols skill. You have Pistols 2, with a specialization in Revolvers, 4. |
|
|
|
Sep 17 2004, 02:22 AM
Post
#15
|
|
|
Prime Runner ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3,577 Joined: 26-February 02 From: Gwynedd Valley PA Member No.: 1,221 |
lol, that may well be so, but it doesn't explain why I developed it. Is there a differnece between the more ergonomic beretta and the more stripped down revolver?
|
|
|
|
Sep 17 2004, 12:49 PM
Post
#16
|
|
|
Deus Absconditus ![]() ![]() ![]() ![]() ![]() ![]() Group: Dumpshocked Posts: 2,742 Joined: 1-September 03 From: Downtown Seattle, UCAS Member No.: 5,566 |
Maybe it fits you, as a shooter, better? With whatever stance, arm position, etc, it could just be that you learned what works with the Webley more quickly than with the Beretta.
I mean, I can't explain a lot of the stuff I know - I can't remember Spanish for beans, but I can spout Japanese like a madman. I rock at Unreal but suck at Call of Duty. Maybe it's just a question of what you've had more luck picking up. |
|
|
|
Sep 23 2004, 11:32 AM
Post
#17
|
|
|
Prime Runner ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3,577 Joined: 26-February 02 From: Gwynedd Valley PA Member No.: 1,221 |
Would the barrel length be that significant? Is this the difference between heavy and light pistols?
The beretta fits in a jacket pocket or sits on my hip in a holster easily. The Webley has a little more length or barrel and the grip stand away from the frame a little and cannot be easily obscured. I'm small so maybe a larger person could hide it in a shoulder holder but if I'm carrying it on my person it is in a military web holster.(I'd love to get one of the leather brit military ones but I'm too small for the mastching belts |
|
|
|
Sep 23 2004, 11:43 AM
Post
#18
|
|||
|
Great Dragon ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,889 Joined: 3-August 03 From: A CPI rank 1 country Member No.: 5,222 |
On average, Light Pistols might have shorter barrels than Heavy Pistols. I would still say the difference between the two is mostly about caliber, since even Light Pistols look like they all have at least a 3½-4" barrel, most at around 5". It is pretty rare for combat handguns to have a barrel longer than that. The H&K Mk 23 Mod 0 is massive, and has a 5.9" barrel. Heavy Pistols would tend to have longer barrels because making handguns that powerful concealable would be rather painful and largely defeat the purpose. Might as well put a little more weight on it to reduce felt recoil by increasing barrel length, with the added bonus of getting more out of the greater amount of powder. |
||
|
|
|||
Oct 17 2004, 03:00 AM
Post
#19
|
|
|
Prime Runner ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3,577 Joined: 26-February 02 From: Gwynedd Valley PA Member No.: 1,221 |
I thought I should give you guys an update.
It was said I should manually cock the gun before shooting. I could see doing this on the double action revolver, but on the automatic, the gun self cocks after the first round so that wasn't an issue. but to be honest I hadn't noticed it. From my experience the pad "hurts" aim, because it makes my hand too comfortable. I was at the range today and getting frustrated. I had really good clusters but all low and a little to the right. I was talking to one of the guys behind the counter afterward along with a guy buying ammo and the comment was "I'd been watching while(I guess the Guess jeans were a good call) you shoot and you got too much meat on the trigger." In short since the gun is easier to hold than the Webley, I'm wrapping my finger too far around the trigger and this is pulling the gun a little off. Since the revolver was less comfortable I had more of a reach so I didn't have that pull. |
|
|
|
Oct 17 2004, 03:24 AM
Post
#20
|
|
|
Moving Target ![]() ![]() Group: Members Posts: 179 Joined: 9-October 04 From: I'm in Hell! HELLLLLLLLLLLLLLL!!!!!!!!! (A.K.A Alabama) Member No.: 6,739 |
Meh, I'm just one of those people too. I shoot MUCH better with a revolver (My personal favorite being the .357 Magnum) then I do with any Semi-Auto. And it's because of the stance I naturaly take, is just better with a (good) revolver, with a thinner handle, then a baretta with a "stuffed" one. But even Semi's with a smaller handle I still suck with...
|
|
|
|
Oct 17 2004, 03:32 AM
Post
#21
|
|
|
Prime Runner ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3,577 Joined: 26-February 02 From: Gwynedd Valley PA Member No.: 1,221 |
I picked up a S&W .357 today, they said I can also fire .38 specials from it but that sounded odd. Certainly if it's true it will make target shooting cheaper.
The .357 I got has a 4" barrell but in the cabinet they had ones with really big barrells and a couple of the tiches with like a 3 inch barrell. I asked wouldn't that really cut down on accuracy compared with the longer barrells, meaning the gun isn't good for much more than pb range, they said no, but it does mean more of the eergy of each shot transfers to your hands. |
|
|
|
Oct 17 2004, 05:10 AM
Post
#22
|
|
|
Moving Target ![]() ![]() Group: Members Posts: 216 Joined: 27-January 04 Member No.: 6,025 |
.357 and .38 Special differ in only one dimension and that is the length of the brass cartridge. Both will fire equally in a revolver but that doesn't apply to semi-automatics, they will jam.
|
|
|
|
Oct 17 2004, 07:45 AM
Post
#23
|
|||
|
Moving Target ![]() ![]() Group: Members Posts: 777 Joined: 18-February 03 Member No.: 4,110 |
I know you know this very well, RG, but since you're giving some tips I thought I'd throw in a bit that seemed to help me starting out. Remember when applying pressure to a trigger, do *not* "pull" the trigger. Rather, "squeeze" the trigger. It's a subtle difference, but it's there. |
||
|
|
|||
Oct 17 2004, 12:54 PM
Post
#24
|
|
|
Runner ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,598 Joined: 15-March 03 From: Hong Kong Member No.: 4,253 |
The 38 special bullet is acutally .357 inches in diameter. IIRc the 38 special round is just a few mm shorter. The long barreled revolvers tend to act like 'barrel weights' and tend to be nicer to shoot that their snubbier cousins.
Going from a 4 inch to 3 inch barrel will cost you ~75 FPS more irritating (not really less, but less ergonomic, you could say) recoil, and some accuracy loss. IIRC a good 3" revolver will still be 'combat accurate' but if you are going for the reduced barrel, make sure you get one with a reputation for accuracy. |
|
|
|
Oct 17 2004, 02:11 PM
Post
#25
|
|
|
Prime Runner ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3,577 Joined: 26-February 02 From: Gwynedd Valley PA Member No.: 1,221 |
ok, this is going to sound odd, but why do they call it a .38?
I know a ".38 special" won't sit in my .38 webley but why not just ".357" and ".357 magnum"? like carrying regular "ammo" or "EX" in SR. to keep this is Sr terms we're saying my .357 Heavy pistol is firing ammo for a light or heavy pistol? |
|
|
|
![]() ![]() |
|
Lo-Fi Version | Time is now: 19th November 2025 - 09:34 PM |
Topps, Inc has sole ownership of the names, logo, artwork, marks, photographs, sounds, audio, video and/or any proprietary material used in connection with the game Shadowrun. Topps, Inc has granted permission to the Dumpshock Forums to use such names, logos, artwork, marks and/or any proprietary materials for promotional and informational purposes on its website but does not endorse, and is not affiliated with the Dumpshock Forums in any official capacity whatsoever.