![]() ![]() |
Apr 24 2004, 08:59 AM
Post
#1
|
|
|
Moving Target ![]() ![]() Group: Members Posts: 328 Joined: 1-October 03 Member No.: 5,667 |
Is there any way to design a Vector Thrust Aircraft that is the size of a car or truck? I'm thinking like a Body 4 or 5 along the lines of the Harrier fighter craft. From what I see in Rigger 3, there is only a body 7 chasis that is WAY expensive. I considered using the Drone UAV with a body of 3 and increasing it's cargo to the max of 25 and then putting in seats and controls - but I'm not sure that's an adequate solution becuase I'm sure other things like canopy etc are not included in the rules. . . which also brings up the point of how exactly does one "convert" a drone into a vehicle which can carry passengers?
|
|
|
|
Apr 24 2004, 10:39 AM
Post
#2
|
|
|
Running Target ![]() ![]() ![]() Group: Members Posts: 1,113 Joined: 26-February 02 Member No.: 1,189 |
I think you could take two approaches here.
1) "Invent" your own chassis by deriving smaller numbers based on the proportional variance between the two that are listed, with GM approval. If you're the GM, then you can approve it, of course. 2) There are mods listed in Rigger 3 for entry points and adding extra seats. As long as the drone has enough internal space and load capacity, they could be added. Otherwise, if there isn't enough internal space, you would have to bolt the seat on top. |
|
|
|
Apr 24 2004, 02:58 PM
Post
#3
|
|
|
Shooting Target ![]() ![]() ![]() ![]() Group: Members Posts: 1,616 Joined: 15-March 04 Member No.: 6,158 |
To give a vehicle a cabin, you just need to add Entry Points. Otherwise, it's considered Open if the Entry category reads --.
Hovercar Version (See the cover of New Seattle) Chassis: Large Vector-Thrust UAV Power Plant: Electric Fuel Cell (Fan-Driven) Minimal Design Requirements: Increased Cargo Space +12 (Total CF of 14) Increased Load +200kg (Total Load of 210kg) Added Manual Controls (-2 CF, -10kg Load) Added Seats (2 Bucket) (-12 CF, -200kg Load) Total Cost: 390 DP (0.60 Mark-Up) = 23,400 nuyen Hoverbike Version Chassis: Mediuml Vector-Thrust UAV Power Plant: Electric Fuel Cell (Fan-Driven) Minimal Design Requirements: Increased Cargo Space 7 (Total CF of 8) Increased Load 100 (Total Load of 110kg) Added Manual Controls (-2 CF, -10kg Load) Added Seat (1 Bucket) (-6 CF, -100kg Load) Total Cost: 163 DP (0.60 Mark-Up) = 9,780 nuyen |
|
|
|
Apr 24 2004, 03:12 PM
Post
#4
|
|
|
Chicago Survivor ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Dumpshocked Posts: 5,079 Joined: 28-January 04 From: Canton, GA Member No.: 6,033 |
Actually, that portrait is a peeve of mine. That's an obvious adaptation of the Moller air car coupe. But it was never put into a game mechanic.
|
|
|
|
Apr 24 2004, 03:13 PM
Post
#5
|
|
|
Shooting Target ![]() ![]() ![]() ![]() Group: Members Posts: 1,616 Joined: 15-March 04 Member No.: 6,158 |
Yes it was, as shown above. They just never gave you pregenerated stats for it. You were always free to make one yourself.
|
|
|
|
Apr 24 2004, 05:19 PM
Post
#6
|
|
|
Moving Target ![]() ![]() Group: Members Posts: 328 Joined: 1-October 03 Member No.: 5,667 |
Thanks for the ideas! I'll see if I can run it by the GM! As far as I can tell, there are no options for increasing the body of a chasis or decreasing its body right? So if I want a body 4, 5, or 6, I'll need to figure out my own chasis basics. . .
|
|
|
|
Apr 24 2004, 05:20 PM
Post
#7
|
|
|
Moving Target ![]() ![]() Group: Members Posts: 328 Joined: 1-October 03 Member No.: 5,667 |
Ooops! I just realized this is the Welcome to the shadows forum and not the main discussion board -- any way to move this thread??
|
|
|
|
![]() ![]() |
|
Lo-Fi Version | Time is now: 3rd June 2026 - 02:04 PM |
Topps, Inc has sole ownership of the names, logo, artwork, marks, photographs, sounds, audio, video and/or any proprietary material used in connection with the game Shadowrun. Topps, Inc has granted permission to the Dumpshock Forums to use such names, logos, artwork, marks and/or any proprietary materials for promotional and informational purposes on its website but does not endorse, and is not affiliated with the Dumpshock Forums in any official capacity whatsoever.